Actions

Tamper switch

From Zenitel Wiki

Revision as of 09:06, 28 June 2019 by Roarl (talk | contribs)

Assembly instruction on Tamper Switch for IP Vandal Resistant Substation TKIE

Step 1: Remove the two nylon nuts shown below

Tamper1.png


Step 2: Attach the supplied spacers

Tamper2.png


Step 3: Mount the tamper switch board

Tamper3.png


Step 4: Move the button GND wire from the the TKIE board to the tamper switch board

Tamper4.png


Tamper5.png


Step 5: Use the supplied wires to connect GND and Input 3 as shown below

Tamper6.png


Retrieved from "https://wiki.zenitel.com/w/index.php?title=Tamper_switch&oldid=206354"