ST STATE
From Zenitel Wiki
| ST_STATE | 0x009A | 154 | AMC 10.23 | |
|---|---|---|---|---|
| Response to the GET_ST_STATE message. | ||||
| Current status of a station
Illegal station or no more stations available will return ST_STATE without parameters | ||||
| 1 | UINT2 | 1 -> 552: Station Physical Number | ||
| 2 | NET_OBJ_REF{ECL_STATION} | Default user Directory Number | ||
| 3 | TEXT16 | Default user Display text | ||
| 4 | UINT4 | State bitmap Bits:
1: 0 = Free, 1 = Busy 2: 0 = A station, 1 = B station in communication.(Param 8. describe related station) 3: 0 = M-rel, 1 = M-pres 4: 0 = Hook on, 1 = Hook off (*)5: 0 = privat off, 1 = private on 6: 0 = No mail, 1 = Mail in queue 7: 0 = Tone test OK, 1 = Failed. (11.1.3.2) | ||
| 5 | UINT1 | Line State
0 Board not present 1 SLI board present, no station 2 SLI board present, station with failure 3 Station connected to SLI board 16 IP station configured, not connected 17 IP station connected but not authorized 18 IP station connected and registered OK, auth not required 19 IP station connected and authorized 20 IP station connected but no license available | ||
| 6 | UINT2 | Station RCI bitmap
1: RCI 1, 0 = off, 1 = on 2: RCI 2.... | ||
| 7 | UINT2 | Station RCO bitmap
1: RCO 1, 0 = off, 1 = on 2: RCO 2.... | ||
| 8 | NET_OBJ_REF | (Empty REF in no conn active)Related station in connection. | ||
| 9 | UINT2 | (0 if no conn active)Connection reference as given in CONN_STATUS_BC | ||
| 10 | UINT1 | (0 if no conn active)CALL status as given in CALL_STATUS_BC | ||
| 11 | UINT4(11.2.3.7) | IP station hardware type. IP HW type ID : 32801 0x8021 SUB station board 1 32802 0x8022 SUB station board 2 32803 0x8023 Console board 32804 0x8024 IP Desktop 28708 0x7024 SoftClient 32806 0x8026 IP-ARIO 00256 0x0100 SIP Phone 00257 0x0101 IP Dummy station 00000 0x0000 Analog station/no station | ||
| 12 | UINT1(11.2.3.7) | Station type as defined in AlphaPro
Station type codes: 1 Sub Station 2 PNCI 3 CRM station 4 InterGuard 5 DualDisplay 6 Custom 7 SIP station 8 Conference Mixer | ||
| 13 | UINT4(11.2.3.7) | IPARIO status flags Bit number: 10 IPARIO down
| ||
| Response to: | GET_ST_STATE | |||
| (*) | Not implemented yet | |||
ST_STATE will be reported to the OPC server when:
- Mail queue changes from 0 to 1 or 1 to 0.
- Line state changes(Line fault etc)
- RCI changes on IP station.
- RCO changes on IP station.
Note: This command require an OPC Server license