VSF-Fortitude6 6.2 Release Notes
From Zenitel Wiki
Release info
This document provides the release notes for VSF-Fortitude6 6.2 with incremental bug fix releases. The release notes for VSF-Fortitude6 6.2 describe new features, improvements and issues fixed after VSF-Fortitude6 6.1.
Name: VSF-Fortitude6
Description: VSF-Fortitude6 is a firmware for IP Desk Master -V2, IP Flush Master -V2 and IP-CROR.
The firmware is delivered in two different files:
- vsff6-6.2.3.x - Used for standard in-field upgrades
- vsff6-prod-6.2.3.x - Used in production- and recovery upgrades.
Version: 6.2.3.0
Date: 30.06.2021
Status: General Availability
Compatibility: IP Desk Master V2 and IP Flush Master V2 and IP-CROR are compatible with Edge, SIP, ICX and AlphaCom systems.
VSF-FORTITUDE6 6.2.3.0
Improvements
RED-46 IPv6 is supported in SIP mode
If IP address of the ICX-AlphaCom server was configured, but not connected to ICX-AlphaCom server, IP address 0.0.0.0 would show in device info on the device itself. This is now fixed. The IP of the ICX-AlphaCom server is displayed on the device even if it has lost connection to the ICX-AlphaCom server.
Issues fixed
MTN-3260 Syslog settings sometimes required reboot to take effect.
Sometimes syslog settings required reboot to take effect. This is now fixed and reboot is no longer required.
MTN-3244 Station fails to register to CUCM when using default registration intervals.
Station could not register to Cisco Unified Call Manager (CUCM) when default registration intervals were used. This is now fixed.
MTN-3234 IP Flush Master DAK 1 led issue resolved.
IP Flush Master had invalid led handling on DAK 1 outside of call.
MTN-3136 Backlight is off when IP Desk Master V2 is set to CRM
The backlight should automatically turn on, when it is set to CRM. This is now working.