REQ TRANSF CALL
From Zenitel Wiki
Revision as of 08:51, 12 June 2007 by 10.5.101.115 (talk) (New page: {| border="1" align=left |- !width="90pt" colspan="2"|REQ_TRANSF_CALL !width="100pt"|0x0088 !width="30pt"|136 !width="100pt"|AMC 08.20 |- |colspan="2"|$TRFC L101 L105||colspan="3"|''Put ...)
| REQ_TRANSF_CALL | 0x0088 | 136 | AMC 08.20 | |
|---|---|---|---|---|
| $TRFC L101 L105 | Put Peer of 101 in conversation with 106 | |||
| Transfer call in an Inquiry Call situation. This message is primarily for internal use. But it can also be used to transfer ordinary calls, se example above. | ||||
| 1 | NET_OBJ_REF | Intermediate destination, used for routing of request | ||
| NET_OBJ_REF<br\>(optional) | A-station in transferred call (source station) | |||
| UINT1<br\>(optional) | Flag (optional): 0 if request from external source (default). 1 if forwarded request, 2 if Sender was Inquiry station | |||
| UINT1<br\>(optional) | Node of original sender, to receive CMD_RESP | |||
| UINT1<br\>(optional) | Device of original sender, to receive CMD_RESP | |||
| Response: | COMMAND_RESPONSE | |||