Faulty Station Line (Event Type)
From Zenitel Wiki
Event description
Event Owner: | A station or an UDP group |
Event type: | 13 - Faulty station line |
Subevent: | N/A |
When change to ON: | When this station's line monitoring has found a problem or if the whole ASLT board becomes faulty |
When change to OFF: | When this station's line monitoring has found the station OK |
When related to: | N/A |
Additional information
Event description
Event Owner: | The faulty station |
---|---|
Event type: | 13 - Faulty station line |
Sub-Event: | N/A |
When Change to ON: | When this station's line monitoring has found a problem of if the whole ASLT board becomes faulty |
When Change to OFF: | When this station's line monitoring has found the station OK |
When Related to: | N/A |
- Additional information:
- - There is also a "Faulty Line" indication on the exchange level, which becomes active if one more stations are faulty. Use that one for general line error reporting
- Application:
- - Switch over a PA-system to a standby cir circuit