Faulty Station Line (Event Type)
From Zenitel Wiki
Event description
Event Owner: | A station or an UDP group |
Event type: | 13 - Faulty station line |
Subevent: | N/A |
When change to ON: | When this station's line monitoring has found a problem or if the whole ASLT board becomes faulty |
When change to OFF: | When this station's line monitoring has found the station OK |
When related to: | N/A |
Application
Switch over a PA-system to a standby circuit
Additional information
There is also a default "Faulty Line" event, which becomes active if one more stations are faulty. This event is used for general line error reporting, and is by default reporting line errors to station 1. The reporting is configured from AlphaPro, Exchange & System -> RCI ->