Actions

Answer call requests by pressing M-key

From Zenitel Wiki

Revision as of 12:47, 2 October 2008 by Asle (talk)

A call request is normally answered by pressing a dedicated DAK key programmed to dial the answer code 7638. But it is also possible to answer call requests by pressing M-key, in this way the operation will be the same as for direct calls in private ringing mode.

In AlphaPro, Exchange & System -> Events, insert a new event with the following parameters:

Event Owner: A station or an UDP group
Event type: 31 - M-key
Subevent: 1 (M key status when station is idle)
When change to: ON (M key pressed)
When related to: (not used)
Action: $MAILQ_NAVIG L%1.dir 8