Actions

1-2a. Analogue Stations – Dual Display (solution)

From Zenitel Wiki

Revision as of 14:51, 16 March 2011 by Asle (talk) (→‎Additional information)
System configuration


Configuration

AlphaPro: Users & Stations
  • In AlphaPro go to Users & Stations in the main menu
  • Select physical number 3; 103 Station 3
  • Use the section on the right and change the Directory Number to 102
  • Change the Display Text to A. Einstein
  • Change Station Type to DualDisplay, click Ok
  • Send the changes to the AlphaCom
  • Check that the display on the dual display station shows: 102 A. Einstein


DAK keys

AlphaPro: Users & Stations -> DAK
  • In AlphaPro go to Users & Stations in the main menu
  • Select physical number 3
  • Click the DAK button in the lower left corner
  • Select the DAK 1-10 tab
    • Insert field 1: I416
    • Insert in field 2: I6540
  • Press DAK1 and observe that 416 Reception is called
  • Press DAK2 and observe that 6540 T. Edison is called


Additional information

AlphaPro: Users & Stations -> DAK -> Navig keys

When selecting Station Type = DualDisplay, the Navigation keys below the display are automatically configured. You can view the navigation key programming by selecting Users & Stations -> DAK -> Navig. Keys tab

  • Check that key 1-4 are:
  • I60 (Info menu)
  • I9543 (Page UP)
  • I9544 (Page DOWN)
  • I9542 (Menu)







Related articles

Retrieved from "https://wiki.zenitel.com/w/index.php?title=1-2a._Analogue_Stations_–_Dual_Display_(solution)&oldid=106777"