1-3d. IP Stations – SIP Station X-Lite (solution)

System configuration

Install and configure the SoftClient

• Download the file SoftClientSetup.msi from e.g. AlphaWiki or from Partnernet, and install it on the PC
• Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
• Start the SoftClient, and select File -> Preferences, and set these parameters:

SoftClient: File -> Preferences window

• Save Settings
• Select Configure Audio Device to adjust speaker and microphone levels

Configure the AlphaCom XE

• In AlphaPro go to Users & Stations, and select physical number 41; 141 Station 41
• Use the section on the right and change the configuration as follows:

File:1-3d solution1.PNG

AlphaPro: Users & Stations window

• Send the changes to the AlphaCom XE

Troubleshooting

• If the X-Lite does not register, check the following:
  • In AlphaWeb, System Configuration -> Filters, verify that ports for SIP and VoIP Audio are enabled
  • In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations

---

Related articles

• 1-3d. IP Stations – SIP Station X-Lite (practice)