1-4f. Main Features – Call Request (solution)

System configuration

Call Request

The call button at the Entrance and at the Elevator should generate a Call Request to the Main Guard:

Program DAK 1 of the two substations to dial 623 + 400

Call Request - Hotline

2 seconds after Mr. Galilei lifts the handset, a Call Request should be made to the Main Guard. The Call Request should be removed if the handset is replaced before answered:

Enable the "Hotline Call" function for Mr. Galilei

Program off-hook to generate a Call Request and on-hook to cancel the Call Request

In Exchange & System -> System, change the Hotline Call timer to 20 (2.0 sec)

CRM - Control Room Master

Set the Station Type = CRM. This will change the display into a four-line display, and it will be more suitable for call request handling

The Main Guard should answer the first call in queue by pressing the leftmost DAK key below the display:

Program the first Navigation Key to dial 7638 - Answer Call Request

By activating the DAK key D1 at the Main Guard, new call requests should be forwarded to the Reception:

Program the first DAK key to dial 7870 + Reception. This will activate the Call Request forwarding