Starting Up Turbine Station

Connecting the PC and the station to a network switch

The Turbine Stations feature an embedded web interface, which allows users to log in via a standard web browser.

To start up the station, your PC and the IP station have to be connected together via a PoE switch using network cables:

1. Connect the PC to a port on the network switch
2. Connect the IP station to a PoE port on the network switch

When the Turbine Station is connected to the network, the IP address of the station is automatically obtained in one of two ways:

1. An IP address is obtained from a DHCP server if there is one.
2. If there is no DHCP server, a random IP address in the range 169.254.x.x will be assigned.

How to find the IP Address of the station

If the station is not registered to a server, it will speak its own IP address when you press the Call button, a Digit key or a DAK key on the station

At startup the station is by default set to operate in PULSE mode.

At commissioning, the IP station needs to be configured to enable it to be used as:

• Station subscribed to an AlphaCom server
• SIP station
• Pulse station