School IP Intercom - 1402001000

Connections

• Intercom connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Note that the off-line display menu is not available for the School IP Intercom, as the navigation buttons are not present on this station. The station must be configured via the web interface.

General configuration.

• IP Station Configuration - AlphaCom mode
• IP Station Configuration - SIP mode

Station specific configuration for the School IP Intercom:

• Configuration of School IP Intercom station - AlphaCom mode
• Configuration of School IP Intercom station - SIP mode

Advanced Network Settings

• VLAN (IEEE 8021Q)
• Network Access Control (802.1X)

Restore Factory Defaults and Software Upgrade

• Reset to factory settings
• Software Upgrade
• Automatic Software Upgrade (SIP mode only)

Connectors, Indicators and Dimensions

• Board Connectors
• Station LED Indications
• PCB LED Indications
• Dimensions

Accessories

• Surface-Mount Backbox for School IP Intercom (1402001010)
• Flush-Mount Backbox for School IP Intercom (1402001030)

Additional Information

• Additional Documentation on Zenitel.com