Flowire

Flowire is based on the HomePlug AV power line communications specification, only using 24 - 48 V DC as the medium. It is a network bridge between Ethernet and a PLC link.

There are two variants

• FCDC1 (1008080110 ) - with PoE - datasheet
• FCDC2 (1008080210) - without PoE - datasheet

Factory defaults

• Static IP address : 169.254.1.10
• DHCP enabled. If obtain an dynamic address, it comes in addition to the static address.
• NMK Password: HomePlugAV0123

Reset to Factory defaults

Flowire can be reset to Factory defaults by pressing the button for 15 seconds. The recessed button is located next to the Ethernet connector.