DTMF During Connection
From Zenitel Wiki
| Feature: | Generate DTMF during conversatiion |
| Default directory number: | None |
| Feature number: | 107 |
| Parameter 1: | 0-9 = DTMF tones 0-9 10 an 11 = '*' and '#' |
| Description: | This feature is only available during connection.
Examples:
Note that the audio from the conversation is switched off during DTMF tone transmission. |
| Param1 | Description | |
|---|---|---|
| 0 - 9 1 | DTMF tones 0-9 | |
| 10 and 11 1 | '*' and '#' | |
| 255 | DTMF tone activated. Following digits dialed are transmitted as DTMF digits | |
|
1 Length of tone = RCO Pulse Time (default 3,5 seconds) | ||
Examples:
- Directory number 1, feature 107/1: When digit 1 is pressed during conversation, DTMF digit 1 is transmitted (default for 3,5 seconds)
- Directory number 1, feature 107/5: When digit 1 is pressed during conversation, DTMF digit 5 is transmitted (default for 3,5 seconds)
- Directory number 1, feature 107/255: Dial digit 1 during conversation to enter "DTMF transmission mode". Audio from the conversation is now switched off. Successive digits will be sent as DTMF digits. E.g. 1 + 345 will send DTMF 3, then 4, then 5. The DTMF tone is transmitted as long as the digit is pressed. Press C-key to leave the "DTMF transmission mode" and return back to conversation mode.
Note that the audio from the conversation is switched off during DTMF tone transmission.