ECP-AA1 Dimensions & Mounting Instructions

	Dimensions (WxHxD)	Weight
TCIS	180 x 120 x 70 mm	0.8 kg*
TCIS after flushmount	180 x 120 x 20 mm
TCIS with onwall box	180 x 120 x 82 mm

*) TCIS-2 weight: 1.0 kg

TCIS Compact Station Dimensions

Flush Mounting

Flush Mount 2-Gang Back Box - TA-2

Note! It is recommended to utilize back boxes with weep holes at the bottom

Flush Mount Bracket - TA-5

Fits US 2-GANG electrical boxes. Recommended screw diameter: up to M4 (5/32"). Use screw recommended by back box manufacurer.

Note! The TA-5 Bracket is mandatory for flush mounting.

Flush Mounting Procedure

1. Mount the 2-gang back box into the wall

2. Mount the bracket onto the back box

3. Fit the gasket onto the bracket with the ridged side facing down

–Plug the Ethernet cable into the RJ-45 port on the station

4. Mount the Turbine station onto the bracket with the M5 fasteners provided

Ensure the station is mounted vertically with the microphone aperture facing down

Ensure there is enough clearance under the station so that the microphone aperture is not smothered