Firewall (IP Stations)

All IP Stations have an embedded firewall.

• Select Advanced Network > Firewall:

Firewall Settings

• SSH [Turbine only]: Enable or disable SSH on station, disabled by default.

• HTTP: Enable or disable HTTP on station, enabled by default.

• HTTPS: Enable or disable HTTPS on station, enabled by default.

• SIP (tcp) [Turbine only]: Enable or disable SIP over tcp on station, enabled by default.

• SIPS [Turbine only]: Enable or disable SIPS on station, enabled by default.

• Demo: Enable or disable DIP on station, disabled by default.

• DIP: Enable or disable DIP on station, enabled by default.

• TFTP Server: Enable or disable TFTP Server on station, enabled by default.

• SNMP: Enable or disable SNMP on station, enabled by default.

• SIP (udp): Enable or disable SIP over udp on station, enabled by default.

• Pulse: Enable or disable Pulse on station, enabled by default.

• mDNS: Enable or disable mDNS on station, enabled by default.

• DIP Multicast: Enable or disable DIP Multicast on station, enabled by default.

• Discovery: Enable or disable Discovery on station, enabled by default.

• Zap [Turbine only]: Enable or disable ZAP on station, enabled by default.

• ZapWeb [Turbine only]: Enable or disable ZapWeb on station, enabled by default.

• VoIP: Enable or disable VoIP on station, enabled by default.

VoIP port range is configurable from firmware 2.7 (INCA) and 4.7 (Turbine) when the station is in SIP mode.