Actions

Zenitel Client USB Control Button

From Zenitel Wiki

Revision as of 14:38, 3 March 2022 by Roarl (talk | contribs) (Created page with "{{EP}} = Overview = VS-Client can also be controlled by an optional external USB button. This button is connected to a USB port on the PC and all necessary software drivers a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
EP.png

Overview

VS-Client can also be controlled by an optional external USB button.

This button is connected to a USB port on the PC and all necessary software drivers are automatically installed.

Actions on the button are detected by the VS-Client as long as the application is running and is not dependent on the application having focus.

VsClientUSBButton.png

Actions and States

While there is an incoming call (VS-Client is ringing)

This is the behavior when VS-Client is in Private mode.

  • The button will flash yellow.
  • Press the button once to accept the call.
  • Press the button twice to reject and terminate the call.

While there is an ongoing call

  • The button will flash green while call is ringing (called station is in Private mode).
  • The button will light green during an ongoing call.
  • Press and hold the button to go into “talking” mode - the button will light red.
  • Release the button to go into "listening" mode - the button will light green.
  • Press the button twice to terminate the call - the button will flash red.
  • Press the button thrice to revert the conversation back to "duplex" mode

While there is no ongoing call

  • Press the button twice to re-establish the last active call.
  • Press the button thrice to open the VS-Client GUI - the button will flash blue.
Retrieved from "https://wiki.zenitel.com/w/index.php?title=Zenitel_Client_USB_Control_Button&oldid=227198"