| Description: |
Place the current conversation on hold, and call the third station. Or with parameter 1 = 1 do a blind transfer to a third station or feature.
 Inquiry and Transfer of call
Consult, then Transfer:
- Press 2 during conversation to put the station on hold, the station on hold will receive a busy signal
- Dial the directory number of the third station and establish a second conversation
- Press digit 2 again you can switch between the two conversations (Brokers function)
- Press digit 3 to transfer the call and disconnect yourself, or alternatively, press C-key to cancel the first conversation, then C-key again to cancel the second conversation
Blind Transfer:
- Press 2 during conversation to put the station on hold, the station on hold will receive a busy signal
- Dial the directory number of the third station or an idle feature code.
- Station on hold will connect to the feature dialed and disconnect yourself.
Blind Transfer (feature 55/1) is not included in autoload.
 Change "ID" to "1" to turn digit 2 into a Blind Transfer
Note:
- On an outgoing SIP Trunk call from an analog station one must press DAK 9 to switch off “transparent mode”, then 2 + number + 3.
- On an outgoing SIP Trunk call from an IP station one must press DAK 4 to switch off “transparent mode”, then 2 + number + 3.
See also Blind Transfer During Connection
|
