Blind Transfer During Connection

Blind Transfer feature

Description

Blind Transfer:

• Press 2 during conversation to put the station on hold, the station on hold will receive a busy signal
• Dial the directory number of the third station or an idle feature code.
• Station on hold will connect to the feature dialed and disconnect yourself.

Blind Transfer (feature 55/1) is not included in Factory Default. To enable digit "2" for Blind Transfer, modify the parameter 1 as indicated in the screen shot below.

Change "ID" to "1" to turn digit "2" during a call into a Blind Transfer

This extends the transfer feature to also give the possibility to do transfer to:

• Stations in private
• Ringing groups
• SIP phones
• Group call
• ++

In combination with automatic search a switchboard operation can be made.
The search string number counter and station is reset when preforming a blind transfer.
Example:

• A is a switchboard defined as ringing group 1.
• B and C are users with automatic search on private ringing /busy programmed as ringing group 1.
• D is someone calling to the switchboard, could be SIP or AlphaCom station.

1. D calls A
2. A does a blind transfer to B, B is private ringing
3. After private ringing timeout D is activating ringing group 1 call back to A, from B's first search string
4. A does a blind transfer to C, C is busy
5. D is activating ringing group 1 call back to A, from C's first search string

etc. etc.

Known limitations

• A (AlphaCom) calls B (SIP) and A try to transfer B to a ringing group. This is currently not supported. ( A (SIP) calls B (AlphaCom) and B transfer to Ringing group is working)