Blind Transfer During Connection

Blind Transfer feature

Description

• Press 2 during conversation to put the station on hold, the station on hold will receive a busy signal
• Dial the directory number of the third station or an idle feature code.
• Station on hold will connect to the feature dialed and disconnect yourself.

Blind Transfer (feature 55/1) is not included in Factory Default. To enable digit "2" for Blind Transfer, modify the parameter 1 as indicated in the screen shot below.

Change "ID" to "1" to turn digit "2" during a call into a Blind Transfer

This extends the transfer feature to also give the possibility to do transfer to:

• Stations in private
• Ringing groups
• SIP phones
• Group call
• ++