Wake-up Calls

This feature can be used as a wake-up call, or as a reminder of an appointment. When the entered wake-up time is reached, the station starts to ring. The ringing tone stops when a key is pressed on the station, or if the handset is lifted.

By default, if the wake-up call is not cancelled, the station will stop ringing after 2 minutes. It will start to ring again up to 5 times, with 5 minutes between each time.

• To enter the wake-up time: Dial 7883, enter the time (hour, minutes), enter the day (day, month) or press M if it is within 24 hours.
• To delete a wake-up time set previously: Dial 7883 + M.
• Wakeup can also be set by the data protocol message WAKE_UP

Additional Information

• Wake-up can be programmed up to 10 months ahead
• You can register only one wake-up time per station. If you program a new wake-up call, it will replace the first one
• The wake-up time is only for one specific date - you can not program a wake-up that will be repeated automatically every day
• Active wake-up is shown in the display (but with lower priority than conversation, mail, transfer/absent)
• The station is open for incoming calls
• The exchange can register up to 200 wake-up calls
• The wake-up takes place no later than one minute after the programmed time
• Wake-up parameters (ringing time, time between calls, number of repetitions), can be changed from AlphaPro: Exchange & System > System > Calls and Options
• The feature is available from AMC 06.00 and later