Turbine Extended series board connectors
From Zenitel Wiki
Revision as of 10:16, 23 June 2023 by Roarl (talk | contribs) (Created page with "{{AEIS}} <br clear=all/> thumb|left|500px|Turbine Extended connectors <br clear=all/> {| border="1" } | align="center" style="backgrou...")
| Item | Description | Comment |
| 1¹ | 2 Relays | Double Throw (SPDT) relay contact with 60W switching power. Max: 250VAC/220VDC, 2A, 60W |
| 2¹ | I/O interface | 6 general purpose I/Os. Each I/O can be configured either as an input or 12mA LED driver output |
| 3¹ | Line Output | Balanced 600 ohm audio line out. Suitable for external induction loop amplifier, PA amplifiers etc |
| 4¹ | Speaker Output | Connection for 8 ohm loudspeaker |
| 5¹ | Microphone Input | Electret mic input |
| 6 | TA-10 connector | Connection for TA-10 Relay Module |
| 7¹ | Power Input | Optional 24VDC power input from external power supply (if PoE is not provided) |
| 8 | LAN Port | Dual 10/100Mbps RJ-45 port for Ethernet connection (inbuilt switch). PoE is supported |
| 9 | AUX | Auxiliary connector for Handset and Headset, and Line IN * Headset/handset speaker (pin 6/7): Minimum 32 Ohms * Microphone input (pin 4/5): For electret type. Bias voltage is 1,25V. * Line In: Maximum input level is 1.228 Vrms (Professional line level). |
|
¹) Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm². |
|
|
|
J9: Keyboard connector
Only available on TKIE-3. See keyboard matrix article for details.