Genetec - Adding Zenitel devices to Sipelia
From Zenitel Wiki
Revision as of 16:13, 21 November 2023 by Thalvorsen (talk | contribs) (Created page with "{{S}} ==Introduction== Sipelia™ is a communication management system within Genetec Security Center, to which you add Zenitel devices in SIP mode. ==Device configuration==...")
Introduction
Sipelia™ is a communication management system within Genetec Security Center, to which you add Zenitel devices in SIP mode.
Device configuration
It's recommended to follow the configuration guides published on the Genetec TecDoc Hub to ensure devices are added to Sipelia in the correct way (requires log-in to TecDoc Hub
Audio stations configuration guide
Video stations configuration guide
ITSV configuration guide
Troubleshooting
Audio issues
If you experience missing audio from/to a station, set codec G.722 to have a lower priority than the G.711a and G.711u codecs in the station. To do this, go to SIP Configuration > Account/Call in the Call Settings section
- On software versions 5.1.3.0 and 02.11.3.0, you must enable Advanced configuration mode to change codec priorities