Actions

VSF-Display Series 8.2 Release Notes

From Zenitel Wiki

Revision as of 14:38, 27 May 2024 by Asle (talk | contribs) (→‎Fixed Issues)

This document provides the release notes for VSFF8MP 8.2 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.2 describe new features, improvements and issues fixed after vsff8mp-8.1.3.2.

Release info

Name: VSF-Fortitude8
Description: vsff8mp is a firmware for Zenitel display series including the following devices: ZMK-1, ZDD-1

The firmware is delivered in two different files:

  • vsff8mp-8.2.3.x - Used for standard in-field upgrades
  • vsff8mp-prod-8.2.3.x - Used in production- and recovery upgrades.

Version: 8.2.3.0
Date: 24.05.2024
Status: General Availability

VSFF8MP 8.1.3.2

Improvements

MTN-4408 Internal microphone gain can now be set as low as -20 dB on TKIS and TKIE

Due to higher sensitivity of some microphones, it is now possible to decrease the gain of microphone on TKIS and TKIE down to -20 dB, instead of -10 dB.


DS-899 SIP/SDP support for dynamic payload for codec L16x48 (HD-Audio)

Now supporting SIP media attribute L16/48000 with dynamic payload type in range 96..127. Note! The device needs to be configured in “HD-Audio” mode and voice processing (AEC and NC) is not supported.


Fixed Issues

MTN-4435 RTSP stream could stop in some cases

In case of audio issues, RTSP stream would terminate. Now the stream will continue with a moment of silence instead.

MTN-4394 Multicast paging working again on intercom devices

Multicast paging was not working on intercom devices when configuring from the webpage. This is now fixed.

MTN-4362 Fixed wrong description in Sound Detection settings

The description of “Minimum time before reactivation” is corrected to “Choose how long to wait before enabling VAD after triggering the DAK key”

Note! This max level is loud and intended for use on heavy noisy environments and when using additional protective ear-plugs.

MTN-4228 Turbine devices could not be used with Bosch VMS

There was a problem on Zenitel ONVIF devices that caused software to crash and device to reboot which made Bosch VMS unable to connect to the device.



Retrieved from "https://wiki.zenitel.com/w/index.php?title=VSF-Display_Series_8.2_Release_Notes&oldid=236296"