Actions

Zenitel Connect Pro 1.4 - Release Notes

From Zenitel Wiki

Revision as of 13:27, 18 November 2024 by Asle (talk | contribs)

This article provides the release notes for Zenitel Connect Pro running on the ICX-510 hardware or in a Virtual Environment. The release notes for ZCP 1.4.x describe new features, improvements and issues fixed after ICX 1.4.0.

Contents

General information

The Zenitel Connect Pro software is available in four different packages:

  • Zenitel_Connect_ICX_1.4.x.swu - Upgrade package for Zenitel Connect Pro running on ICX-510
  • Zenitel_Connect_VM_1.4.x.swu - Upgrade package for existing installation of Zenitel Connect Pro running on Virtual Machine
  • Zenitel_Connect_VMware_1.4.x.zip - Installation package for a fresh install of Zenitel Connect Pro running on VMWare
  • Zenitel_Connect_VBox_1.4.x.zip - Installation package for a fresh install of Zenitel Connect Pro running on Virtual Box

Version 1.4.1

Release info

Name: See "General Information" section
ICX Version: 1.4.1
Date: 11.11.2024
Status: General Availability
Compatibility: Compatible with device software version 9.0.3.1. Compatible with Zenitel PAVA Vipedia-12 running Vipedia SW bundle 5.1.4.0P

Fixes issues

ZEN-863 The relays on IP-LCM were not supported

Operation of the relays on the IP-LCM unit is now supported

Known issues

ZEN-862 If not entering a complete PIN code on TEIV-1+ the tone will continue until completed or X is pressed

ZEN-823 Users might be logged off after a timeout of 30 minutes and need to log in again

ZEN-819 Scan and Pair doesn't pair if browser is not in focus

ZEN-779 When ZCP is run on virtual machines, if more network interfaces are added IP’s can be lost and ZCP becomes unreachable

ZEN-764 When replacing a device, pressing scan again is needed

ZEN-757 Broadcast is not working if the caller is member of the broadcast group

ZEN-752 Several PAVA functions require the use of # and * which is only present on ITSV keyboards

ZEN-732 The status field for a PAVA account does not show any status of the connection

ZEN-650 A reboot is required after host name change for the change to take effect. This also affects the system name

ZEN-562 Display text can show %40 instead of @

ZEN-540 After restore you have to scan and pair to get the devices connected again

ZEN-114 When the static IP-address of Zenitel Connect is changed, the system needs to be reconfigured

PAVA-263 The Play DVA announcement type for the menu of the PAVA integration does not currently work

PAVA-260 If the PAVA configuration contains an account with a zone that doesn’t exist, announcements cannot be made


Version 1.4.0

Release info

Name: See "General Information" section
ICX Version: 1.4.0
Date: 29.10.2024
Status: General Availability
Compatibility: Compatible with device software version 9.0.3.1. Compatible with Zenitel PAVA Vipedia-12 running Vipedia SW bundle 5.1.4.0P

This is the first official release.

Retrieved from "https://wiki.zenitel.com/w/index.php?title=Zenitel_Connect_Pro_1.4_-_Release_Notes&oldid=238874"