Audio (Event Type)
From Zenitel Wiki
The Audio event is intended for PA control or mobile radio keying, that is, as an extension to the audio function of the 'owner' station. Normally the action for this event is the operation of a RCO. The Audio event is divided into a number of sub-events, which are closely related to each other, and which can be combined to operate the same RCO. UDP Groups cannot be used with Audio events. Audio events are not associated with a 'When Related to' number. In AlphaPro the sub-events can be selected after clicking the 'Details'-button.
Sub-Event 14 - Always
This event is triggered on both incoming and outgoing calls.
Event Owner: | A station (normally a PA Interface) |
---|---|
Event type: | 1 - Audio |
Sub-Event: | 14 (Always) |
When Change to ON: | Simplex listen
Tones (connect- and disconnect-tones, private ringing etc) |
When Change to OFF: | When Simplex listen or the tones stop |
When Related to: | N/A |
Sub-Event 12 - Incoming Call
This event is triggered on incoming calls only
Event Owner: | A station (normally a PA Interface) |
---|---|
Event type: | 1 - Audio |
Sub-Event: | 12 (Incoming Call) |
When Change to ON: | Simplex listen
Tones (connect- and disconnect-tones, private ringing etc) |
When Change to OFF: | When Simplex listen or the tones stop |
When Related to: | N/A |
Additional notes: The event is reported OFF (and stays OFF) if the user touches any key or the handset. This is called “take down” intended to transfer an incoming call from an external RCO-controlled speaker to the station’s internal speaker when the user touches any key or the handset