Actions

Tamper Resistant Substation - 1070601010

From Zenitel Wiki

Revision as of 16:40, 27 August 2007 by Asle (talk)
Tamper Resistant Substation 107 0601 010.jpg

Features

  • Extremely rugged 1/4" machined metal front plate. Large call-in button for instant contact.
  • No-penetration speaker grille. Protected microphone and amplifier.
  • Red “microphone open” LED.
  • Built-in 45 Ohm loudspeaker.
  • Excellent sensitivity and voice reproduction.
  • Adjustable microphone sensitivity
  • Screw terminals for easy connection of installation cables.
  • Freely programmable extension numbers or features.
  • Securely fastened

Description

This Tamper-Resistant Substation has an extremely rugged metal front plate of anodized, brushed aluminium. The substation has a unique design to protect the loudspeaker, microphone, LED indicator and internal electronics from external abuse.

The station flush-mounts on a back box. The metal front plate can be securely fastened to the box with 4mm tamper-resistant screws (provided) or pop rivets.

Fast call initiation is possible with the call-in button. Call-in can be programmed to call any extension number or feature - including Emergency Calls, All Calls - or call queuing to a Stentofon Control Room Master (CRM), MLH, or Call Handler System.

The station has a built-in 45 Ohm loudspeaker. With a potentiometer located inside the casing, it is possible to adjust the microphone sensitivity according to the environmental conditions. The station has screw terminals with labels ensuring easy installation.

Installation

Heavy Duty Industrial Substation 100 7083 000 Installation.jpg











Wiring

Heavy Duty Industrial Substation 100 7083 000 Wiring.jpg