Activate RCO output at remote station feature

58 FEAT_PULSE_PEER_RCO

Param1	Description
??	Activate Remote Control output at peer station
During connection: Generates event "Door Opening" on other station.

Feature:	Remote control (Door opening)
Default directory number:	6 - during conversation
Feature number:	58
Parameter 1:	0 (N/A)
Description:	During conversation, dial 6 to operate an A station can activate the other station's remote control device (RCO) by pressing and releasing digit 6 during connection. If the station has remote control assigned, a success tone is given. The feature generates an event to the Event Handler, where the actual remote control takes place. The feature has timing so that the event is reported OFF after 3,5 seconds (programmable).