AlphaCom call statistics log
From Zenitel Wiki
This is the call log for the Alphacom. It is part of the Syslog (AlphaCom). Only received calls are logged from a AlphaCom. In order to get the complete picture in a AlphaNet, the call statistics log for all nodes has to be collected.
For calls over IP, statistics of packet loss and delay for the call is also logged.
Contents
Description of log string
Common part Log event
|--------------------------------------------------------| |-----------------------------------------------------------------------------------------|
Oct 24 10:19:31 src@Oppdal AlphaLog: Stat Event: Received Node3\S561(Ellefsen, Ak)->Node50\S2599(Egil@IP CR) for 322S (g722,late/K0,lost/K0,delay 0)
|---------------|----------|------------------------------|------------------------||------------------------|--------|------------------------------|
| | | | | | |
| | | | | | |
1 2 3 4 5 6 7
Log string examples
Oct 24 10:19:31 src@Oppdal AlphaLog: Stat Event: Received Node3\S561(Ellefsen, Ak)->Node50\S2599(Egil@IP CR) for 322 S (g722, late/K 0, lost/K 0, delay 0) Oct 24 15:09:59 src@Oppdal AlphaLog: Stat Event: Received Node50\S102(zEgil@Oppdal)->Node50\S6419(Egil@Analog) for 1 S
First entry is a IP related call (AlphaNet connection). The second one is a internal call between two ASLT based stations.
What is logged, and where?
Call Statistics Log configured in Node 1 will log:
- conversations between locally connected stations (analogue and IP stations)
- incoming calls from analogue and IP stations in other AlphaNet nodes
- incoming SIP calls from IP DECT phones (SIP registrar)
- incoming calls from AudioCodes (SIP trunk)
- outgoing Pocket Paging calls
AlphaNet: In order to log all conversations between stations (analogue and IP), the Call Statistics Log in all ACE nodes must be activated. If they are all sent to the same SysLog (e.g. Kiwi Syslog Daemon), it will present a complete picture. If SIP calls are involved, call statistics from the different SIP equipment must be relayed to the same SysLog in order to log conversations in both directions.
Multi-Module: Only the master module needs to have the Call Statistics Log activated in order to log all conversations within the Multi-Module.