OPC Server - Release Notes
From Zenitel Wiki
Release State: Released
Release Version: 5.0.0.0
Bata Version (upcomming release): 5.1.2.1
Installation Package: OPCServerSetup.msi
Contents
- 1 AlphaCom OPC Server 5.1.2.1 (2010-08-18)
- 1.1 Functional Changes/Enhancements
- 1.1.1 BZ 227 OPC DA: No information available telling which station is A- and B-subscriber in a conversation
- 1.1.2 OPC DA: No information available seperating if station is in calling mode (private ringing) or in a conversation (connected)
- 1.1.3 BZ 420 From OPC it should be possible to send alarm messages to groups
- 1.2 Errors Corrected
- 1.1 Functional Changes/Enhancements
- 2 AlphaCom OPC Server 5.0.0.0 (2009-07-01)
- 3 AlphaCom OPC Server 4.1.0.0 (2009-04-01)
- 4 AlphaCom OPC Server 4.0.0.0 (2008-10-29)
AlphaCom OPC Server 5.1.2.1 (2010-08-18)
Functional Changes/Enhancements
BZ 227 OPC DA: No information available telling which station is A- and B-subscriber in a conversation
New tag .callapri, see Station Item Table
OPC DA: No information available seperating if station is in calling mode (private ringing) or in a conversation (connected)
New tag .callmode, see Station Item Table
BZ 420 From OPC it should be possible to send alarm messages to groups
Added new nodeX.groups.gx node tree, see Node Item Table
Errors Corrected
BZ 330 AE: Some events are not reported on the selected format
AlphaCom OPC Server 5.0.0.0 (2009-07-01)
Functional Changes/Enhancements
Major changes
- Re-written to use the new Stentofon.AlphaCom.AlphaNet.dll library.
- Config file name and format is changed with the new library. New config file name: Stentofon.AlphaCom.AlphaNet.OPC.xml
The OPCServerConfigurator application will test for old config file, and prompt for automatic conversion to the new format. - Implemented Redundant OPC Server mode allowing two OPC Devices connect to the same AlphaCom nodes. Requires AlphaCom Sys version 10.55
- The station item .relatedto is now updated on AlphaCom CallStatus event. The .relatedto property will then be set on calls in private mode, before the call is accepted.
<br\> Easy Projects Activities
| Activity | Short Description |
|---|---|
| 209 | Make (IP) station IO items based on ST_STATE messages, make RCO/RCI item obsolete |
| 210 | Make global node RCI based on RCI_CHANGED messages incl OPC/RCI config |
| 211 | Implemented OPC Items for M-Key, C-Key and DAK-key |
| 217 | Updated to use library Stentofon.AlphaCom.AlphaNet.dll |
| 166 | Redundant OPC Server |
Limitations
Global RCI/RCO states is updated on state changes, but is not synchronized at OPC Server startup.
Errors Corrected
Easy Projects Activities
| Activity | Short Description |
|---|---|
| 205 | cr_iterate_command items offset |
| 206 | OPC AE: "Station UP" is reported on all ST_STATE changes |
AlphaCom OPC Server 4.1.0.0 (2009-04-01)
Functional Changes/Enhancements
Added the OPC AE event StationSignal (.signal).
This event is generated from the station sending a Call Request ("I need attention")
AlphaCom OPC Server 4.0.0.0 (2008-10-29)
First official Release