Grandstream GXP2000

Enter password: admin

Set IP address

Enter AlphaCom IP address and User ID

Make sure that the phone has the latest firmware version.

Factory default settings

How to perform a Factory Reset of the GXP2000:

1. Disconnect the ethernet cable
2. Press the round MENU button to enter GUI.
3. Scroll down to CONFIG and select it (by pressing round button again)
4. Scroll down to Factory Reset and select it.
5. Move cursor to the empty space above the OK and CANCEL.
6. Enter the MAC Address with alphabets and numbers.
7. Once finished, press round button till cursor is on OK.
8. Press the round button once more to initiate the Factory Reset.
9. Reconnect the ethernet cable

The display will show the IP address of the phone.

Set IP address of the phone:

• Press the Menu key on the phone and scroll inside the menu with the arrow keys

Configuring the phone:

• The remaining configuration is done from the web interface
• Log on to the phone via your web-browser using the IP address entered above
• Password: admin (small letters)
• In Basic Settings the IP-address & Subnet Mask can be changed

Select Advanced Settings

• Enter the IP address of the AlphaCom E exchange
• Enter SIP User ID – must be identical to the Directory Number entered in AlphaPro
• Update and Reboot

Configuration of AlphaCom E

The AlphaCom E needs to be configured with a SIP registrar node.