Time Settings (Zenitel Connect Pro)
From Zenitel Wiki
Introduction
Cyber security restrictions requires that all devices connected to Zenitel Connect Pro are time synchronized with Zenitel Connect Pro, which therefore acts as the NTP-server for all connected devices.
Zenitel Connect Pro itself can be connected to an NTP-server. If an NTP-server is not available, the time can be set manually.
Although it is possible to set a time zone, internally, Zenitel Connect Pro uses UTC time; all logs and times which are part of responses to API-calls are in UTC. The time zone setting is only used to display correct local time and date on devices with a display.
Time configuration
The time settings can be configured in the Service Connections tile in the System section
 |
| Time Settings |
Time source
NTP Server
The default NTP Server address is pool.ntp.org, edit as appropriate. The time zone is by default UTC. The timezone can be changed by either:
- Selecting a timezone from the dropdown list
- Clicking the button labeled Map and subsequently selecting a timezone on the map
Manual
If an NTP server is not available, select Set time using: Manual. Edit the date and time directly in the edit field, or use the date/time picker to set date and time. The time should be set as UTC and adapted to local time by setting the correct timezone.
- Selecting a timezone from the dropdown list
- Clicking the button labeled Map and subsequently selecting a timezone on the map