Difference between revisions of "1-1a. Exchange startup (solution)"
From Zenitel Wiki
(Created page with "Text... ===Related articles === * Exchange startup (practice) Category: AlphaCom practice") |
(→Related articles) |
||
(17 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | + | [[File:EX1-1a.PNG|left|thumb|600px|System configuration]] | |
+ | <br style="clear:both;" /> | ||
+ | __NOTOC__ | ||
− | === | + | ===Cards=== |
− | * [[ | + | *Insert the [[ASLT]] card in position 1. |
+ | *Insert the [[AMC-IP]] card in position 7. | ||
+ | |||
+ | ===Power=== | ||
+ | *Connect the power source to the plug on the back of the exchange, marked '''''24 VAC IN''''' | ||
+ | *Connect the mains cable to the wall outlet | ||
+ | *Observe the exchange starting | ||
+ | |||
+ | ===Coldstart=== | ||
+ | *Press and hold the [[Autoload|coldstart]] button on the AMC-IP board | ||
+ | *Press the reset button on the power card briefly | ||
+ | *Keep the cold start button pressed at least 2 sec. after reset | ||
+ | *The AMC status LED will blink green when the system is up and running | ||
+ | |||
+ | ===Station connection=== | ||
+ | *Connect the two master stations to physical port number 1 and 2 | ||
+ | *Call the other station by dialling the directory number shown in the display | ||
+ | <br><br><br><br> | ||
+ | ---- | ||
+ | ===Related articles === | ||
+ | * [[1-1a. Exchange startup (practice)]] | ||
[[Category: AlphaCom practice]] | [[Category: AlphaCom practice]] |
Latest revision as of 10:02, 30 June 2022
Cards
Power
- Connect the power source to the plug on the back of the exchange, marked 24 VAC IN
- Connect the mains cable to the wall outlet
- Observe the exchange starting
Coldstart
- Press and hold the coldstart button on the AMC-IP board
- Press the reset button on the power card briefly
- Keep the cold start button pressed at least 2 sec. after reset
- The AMC status LED will blink green when the system is up and running
Station connection
- Connect the two master stations to physical port number 1 and 2
- Call the other station by dialling the directory number shown in the display