View source for 1-2a. Analogue Stations – Dual Display (solution)

[[File:1-2a config.PNG|left|thumb|400px|System configuration]]
<br style="clear:both;" />
__NOTOC__
===Configuration===
*In AlphaPro go to '''Users & Stations''', and select physical number 3; 103 Station 3 
*Use the section on the right and change the configuration as follows:
[[File:1-2a solution.PNG|400px|thumb|left|AlphaPro: Users & Stations]]
<br style="clear:both;" />

* Send the changes to the AlphaCom:
[[File:SendChg.PNG|400px]]

* Check that the display on the dual display station shows: 102 A. Einstein
<br><br>

===DAK keys===
*In AlphaPro go to '''Users & Stations''' and select physical number 3
*Click the '''DAK''' button in the lower left corner
* Select the '''DAK 1-10''' tab, and insert the following:
[[File:1-2a solution2.PNG|thumb|left|300px|AlphaPro: Users & Stations -> DAK]]
<br style="clear:both;" />

*Press DAK1 and observe that 416 Reception is called
*Press DAK2 and observe that 6540 T. Edison is called
<br style="clear:both;" />

=== Additional information ===
When selecting Station Type = DualDisplay, the Navigation keys below the display are automatically configured. You can view the navigation key programming by selecting Users & Stations -> DAK -> Navig. Keys tab
*Check that key 1-4 are:
**I60  ''(Info menu)''
**I9543  ''(Page UP)''
**I9544  ''(Page DOWN)''
**I9542  ''(Menu)''
[[File:1-2a solution4.PNG|thumb|left|300px|Navigation keys]]
<br style="clear:both;" />
[[File:1-2a solution3.PNG|thumb|left|300px|AlphaPro: Users & Stations -> DAK -> Navig keys]]
<br style="clear:both;" />


<br><br><br><br>

----

===Related articles ===
* [[1-2a. Analogue Stations – Dual Display (practice)]]

[[Category: AlphaCom practice]]