Difference between revisions of "1-4j. RCO, Call indication (practice)"
From Zenitel Wiki
(→Exercise) |
(→Exercise) |
||
| Line 4: | Line 4: | ||
'''Private Ringing indication''' | '''Private Ringing indication''' | ||
*When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard is in “Private” mode). | *When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard is in “Private” mode). | ||
| − | *The lamp should | + | *The lamp should be turned off when the private ringing stops. |
* Use logical RCO 10 to operate the relay | * Use logical RCO 10 to operate the relay | ||
| Line 10: | Line 10: | ||
'''Call Queue indication''' | '''Call Queue indication''' | ||
*When the Main Guard receives a Call Request, the same lamp should be activated to indicate that there is one or more calls in the call queue (Tip: Use event "Priority Mail Present"). | *When the Main Guard receives a Call Request, the same lamp should be activated to indicate that there is one or more calls in the call queue (Tip: Use event "Priority Mail Present"). | ||
| − | *The lamp should | + | *The lamp should be turned off when there are no more calls in the queue. |
Revision as of 15:47, 29 June 2016
Exercise
Private Ringing indication
- When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard is in “Private” mode).
- The lamp should be turned off when the private ringing stops.
- Use logical RCO 10 to operate the relay
Call Queue indication
- When the Main Guard receives a Call Request, the same lamp should be activated to indicate that there is one or more calls in the call queue (Tip: Use event "Priority Mail Present").
- The lamp should be turned off when there are no more calls in the queue.