Difference between revisions of "1-4j. RCO, Call indication (practice)"
From Zenitel Wiki
| Line 3: | Line 3: | ||
=== Exercise === | === Exercise === | ||
'''Private Ringing indication''' | '''Private Ringing indication''' | ||
| − | *When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard | + | *When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.). |
*The lamp should be turned off when the private ringing stops. | *The lamp should be turned off when the private ringing stops. | ||
* Use logical RCO 10 to operate the relay | * Use logical RCO 10 to operate the relay | ||
Revision as of 15:51, 29 June 2016
Exercise
Private Ringing indication
- When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).
- The lamp should be turned off when the private ringing stops.
- Use logical RCO 10 to operate the relay
Call Queue indication
- When the Main Guard receives a Call Request, the same lamp should be activated to indicate that there is one or more calls in the call queue (Tip: Use event "Priority Mail Present").
- The lamp should be turned off when there are no more calls in the queue.