Difference between revisions of "AMC-IP software upgrade (Black AMC-IP board)"
From Zenitel Wiki
| Line 4: | Line 4: | ||
and factory default settings will be loaded. | and factory default settings will be loaded. | ||
However, configuration made from AlphaWeb (e.g. IP addresses, IP routing etc.) will be kept. | However, configuration made from AlphaWeb (e.g. IP addresses, IP routing etc.) will be kept. | ||
| − | + | * '''Backup:''' Before upgrading the costumer data must be backed up by doing a GetAll from [[AlphaPro]]. | |
[[Image:AlphaWeb System Upgrade.png|thumb|300px|AlphaWeb - System Upgrade]] | [[Image:AlphaWeb System Upgrade.png|thumb|300px|AlphaWeb - System Upgrade]] | ||
* Use Internet Explorer or another internet browser and log on to the AlphaCom Web interface ([[AlphaWeb]]) and select '''System Upgrade''' -> '''System Upgrade'''. | * Use Internet Explorer or another internet browser and log on to the AlphaCom Web interface ([[AlphaWeb]]) and select '''System Upgrade''' -> '''System Upgrade'''. | ||
Revision as of 21:46, 22 September 2008
Download the AMC-IP software package from the download site at www.zenitel.com, and save the file on your PC.
Important: When upgrading to AMC version 10.50 the current configuration will be lost, and factory default settings will be loaded. However, configuration made from AlphaWeb (e.g. IP addresses, IP routing etc.) will be kept.
- Backup: Before upgrading the costumer data must be backed up by doing a GetAll from AlphaPro.
- Use Internet Explorer or another internet browser and log on to the AlphaCom Web interface (AlphaWeb) and select System Upgrade -> System Upgrade.
- To free up space delete any files listed under "Repository AMC System Packages"
- Browse to the AMC-IP software file, and select Upload. The file will now be transfered from the PC to the AMC-IP board. This process takes approx. 30 seconds (???).
- When the upload is finished the file will appear in the list of repository files. Press Select. The integrity of the file is now checked.
- Press Install Selected. The software will now be installed.
- When the software installation is finnished the system will restart with factory default settings.
- Restore the configuration by doing a SendAll operation from AlphaPro