Difference between revisions of "Address Book (Edge)"
From Zenitel Wiki
| Line 6: | Line 6: | ||
The configuration of the Address Book is done at the Edge Controller, which will push configuration to the Turbine station. There is no need to log on to each individual station. | The configuration of the Address Book is done at the Edge Controller, which will push configuration to the Turbine station. There is no need to log on to each individual station. | ||
* [[Logging into an IP Station|Log on to the Edge Controller]], and select '''Edge Controller''' > '''System Configuration''' > '''Special Settings''' | * [[Logging into an IP Station|Log on to the Edge Controller]], and select '''Edge Controller''' > '''System Configuration''' > '''Special Settings''' | ||
| − | * Under the '''Address Book''' column, select '''Show/Hide Settings''' | + | * Under the '''Address Book''' column, select '''Show/Hide Settings'''. This will open for Address Book configuration |
[[File:Edge AddressBook.PNG|thumb|left|700px|Address Book configuration]] | [[File:Edge AddressBook.PNG|thumb|left|700px|Address Book configuration]] | ||
Revision as of 17:10, 14 March 2019
|
This article is under construction! |
This article shows how to configure the Address Book of the Turbine station models TCIS-6, TCIV-6 and TFIE-6 when used in an IC-EDGE System. The Address book is used to preload the station with a set of entries that you can select using the Scroll buttons on the station.
The configuration of the Address Book is done at the Edge Controller, which will push configuration to the Turbine station. There is no need to log on to each individual station.
- Log on to the Edge Controller, and select Edge Controller > System Configuration > Special Settings
- Under the Address Book column, select Show/Hide Settings. This will open for Address Book configuration
- In the Address Book section, enter in the Display Text field the text to display in idle. The default text is: Scroll to Select
- In the Address Book Entries section, fill in Number and Name, then Add + Save.
- Only the Name will be visible in the station display.
- Use the Scroll Up/Down buttons to navigate in the name list.
- Press the Call Button to dial the Number assosiated with the Name
- Upload the Address Book as a .csv file with number;text entries for call destinations (up to 5kB file size). When new address book file is uploaded the existing entries will be deleted.
- Download Address Book: Link to current AddressBook.csv file which is used on the station. This link will not be visible if address book is empty.
Address Book entries
The following Address book entry formats are valid:
- Directory number. Example: 101, 231, etc
- SIP URI scheme - user@hostname, user@ipaddress. Example: 201@building1.telecom.com, 301@10.5.101.123
- Ring list entries. Example: @ringlist1, @ringlist2, @ringlist3
Upload .csv file
- Upload Address Book: A textfile with the extension .CSV consisting of directory numbers and display text with the semi-colon character (;) as delimiter may be uploaded. The CSV file can contain approx. 250 names, depending on the length of each name. The CSV file can be 5 kB at maximum. There should be no tab spaces in the file.
- Click Browse... to upload a CSV file
Default call destination
The Call Button of the TCIS-6 and the TCIV-6 will call a default number when pressed without having scolled in the address book first. DAK-1 call destination will be used to make outgoing call in such scenario.