AudioCodes MP114/118, v5.4 and higher

This article describes the setup of the AlphaCom E system and the AudioCodes MP-114/118 SIP Gateway, firmware version 5.4 and 5.6. The article covers the most common features used in an AlphaCom ↔ AudioCodes interconnection.

Customizing the web interface logo

In a few easy steps its possible to change the logo that is seen in the top left corner in the Audiocodes web interface.

• Access the device's web interface.
• In the URL field, append the case-sensitive suffix ‘AdminPage’ to the IP address (e.g. http://10.1.229.17/AdminPage); the 'Admin' page appears.
• On the left panel, click 'Image Load to Device'.
• Click the Browse button, and then navigate to the folder in which the logo image file that you want to use is located.
• Click the Send File button; the image file uploads to the device. When loading is complete, the page is automatically refreshed and the uploaded logo image is displayed in the Web interface's title bar.
• If you want to modify the width of the image, in the 'Logo Width' field, enter the new width (in pixels) and then click the Set Logo Width button.
• Save the image by pressing the 'Burn' button located on the top menu bar in the mainpage.