Difference between revisions of "Audio (Event Type)"
From Zenitel Wiki
(→Sub-Event 14 - Always) |
(→Sub-Event 12 - Incoming Call) |
||
Line 36: | Line 36: | ||
This event is triggered on incoming calls only | This event is triggered on incoming calls only | ||
− | + | ----- | |
{| | {| | ||
! align="left"|[[Event Owner]]: | ! align="left"|[[Event Owner]]: | ||
Line 62: | Line 62: | ||
|- | |- | ||
|} | |} | ||
+ | ----- | ||
== Application== | == Application== |
Revision as of 00:09, 27 June 2007
The Audio event is intended for PA control or mobile radio keying, that is, as an extension to the audio function of the 'owner' station. Normally the action for this event is the operation of a RCO. The Audio event is divided into a number of sub-events, which are closely related to each other, and which can be combined to operate the same RCO. UDP Groups cannot be used with Audio events. Audio events are not associated with a 'When Related to' number. In AlphaPro the sub-events can be selected after clicking the 'Details'-button.
Contents
Event description
Sub-Event 14 - Always
This event is triggered on both incoming and outgoing calls.
Event Owner: | A station (normally a PA Interface) |
---|---|
Event type: | 1 - Audio |
Sub-Event: | 14 (Always) |
When Change to ON: | Simplex listen
Tones (connect- and disconnect-tones, private ringing etc) |
When Change to OFF: | When Simplex listen or the tones stop |
When Related to: | N/A |
Sub-Event 12 - Incoming Call
This event is triggered on incoming calls only
Event Owner: | A station (or a PA or Mobile Radio Interface) |
---|---|
Event type: | 1 - Audio |
Sub-Event: | 12 (Incoming Call) |
When Change to ON: | Simplex listen
Tones (connect- and disconnect-tones, private ringing etc) |
When Change to OFF: | When Simplex listen or the tones stop |
When Related to: | N/A |
Application
- CCTV control
- Busy indication