Actions

COMMAND RESPONSE

From Zenitel Wiki

Revision as of 16:13, 6 July 2022 by Roarl (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
AI.png
COMMAND_RESPONSE 0x0066 102 AMC 07.00
General response message to messages introduced in AMC 07.00 or newer messages.

(COMMAND_RESPONSE is used rather than dedicated XXX_ACK and XXX_NAK messages )

1 UINT2 The message_id that this message is a response to.

Example: 0x0065 if this message is a response to CANCEL_MAIL.

2 UINT1 Command status, possible values are:

1 = Command performed successfully.
2 = Target was busy, no queuing.

3 = Internal resource was busy, no queuing.

4 = Access not allowed. (OPC: no license)

5 = Target busy, command queued.

6 = Target HW failed/not present (OPC: overlapping registration of same OPC device from different nodes).

3 UINT4 Command response options:

Additional information about the execution of the message. Interpretation of this field is dependent on the message id, see separate descriptions under each message having this message as response.

Back to AlphaNet message list