Difference between revisions of "Call Forwarding at preset times"
From Zenitel Wiki
| Line 11: | Line 11: | ||
</tr> | </tr> | ||
</table> | </table> | ||
| − | |||
Typical applications: | Typical applications: | ||
| − | * | + | * Tim |
| − | * | + | * xxxx |
| − | |||
As the internal clock of the ICX-AlphaCom server might drift over time, it is recommended that the server is [[ICX_Web#Time_and_Date|synchronized with a NTP server]] to ensure correct time. | As the internal clock of the ICX-AlphaCom server might drift over time, it is recommended that the server is [[ICX_Web#Time_and_Date|synchronized with a NTP server]] to ensure correct time. | ||
| − | + | == Configure the Scheduler event == | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
The [[Scheduler (Event Type)|Scheduler]] feature is a part of the [[Event Handler]] module in ICX-AlphaCom. | The [[Scheduler (Event Type)|Scheduler]] feature is a part of the [[Event Handler]] module in ICX-AlphaCom. | ||
| Line 92: | Line 60: | ||
<br> | <br> | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==Verify the of operation== | ==Verify the of operation== | ||
Revision as of 14:11, 11 August 2022
|
This article is under construction! |
The built-in Scheduler function in ICX-AlphaCom can be used activate Call Forwarding at preset days and times.
 |
| Dispatch a prerecorded message at a preset time |
Typical applications:
- Tim
- xxxx
As the internal clock of the ICX-AlphaCom server might drift over time, it is recommended that the server is synchronized with a NTP server to ensure correct time.
Configure the Scheduler event
The Scheduler feature is a part of the Event Handler module in ICX-AlphaCom.
In AlphaPro, select Exchange & System > Events, and Insert a new event. Set the Owner Type = Scheduler. A new window is opened, in which you fill in the weekdays and time, or alternatively the date and time.
 |
| Setting time and weekdays. Here: trigger at 16:45 Monday to Friday. |
Next step is to fill in the Action Command. For distribution of prerecorded wav-file we normally use the DP Command $GM (GROUP_MSG).
 |
| Specify which message to send to which group |
Set When Change To = ON.
Explanation of action command $GM L85 L8191 U1 U0 U0
- $GM - Group Message command
- L85 - Destination group
- L8191 - Announcement message for playback in group
- U1 - Number of repetitions. Here: play once
- U0 - No gong signal
- U0 - Use default Setup Priority
Change parameters as required.
To modify the time and date of an existing Scheduler event, press the button Details.
If multiple times are required, simply create a new Scheduler event for each time.
Verify the of operation
The operation can be verified by temporarily changing the time in the server.
- In the web interface, go to System Configuration > Time and Date.
- Under Set Localtime, set a time one minute before the specified time in the event. E.g. 16:44:00 (six digit notation)
- One minute later the event will trigger, and the message will be dispatched.
If the server is set to sync time with NTP server, you might have to first remove the IP address of the NTP server (enter a space), then reboot the server. Now you can Set Localtime.