Call Request forward by search strings

Functionality

When a call request is added to a station queue and the receiving station is configured with Automatic search type call request the following happens:

A timer related to the mail is started, if the mail is still active after timeout Search string 1 is activated at the initiator station. A new timer is started and if still the mail is active Search string 2 is activated, then Search string 3.
The Search string can contain new call request "I623 I85" or a call to Phone "I73123456" etc*

Automatic Call Request Delete

The SEND_MAIL flag "Automatic Delete" can(should) be used for easy cleanup of call requests if the call request is forwarded several times. The Automatic delete function is default for Ringing Groups and Autoload call request directory number 627 (call request) and 628 (call request alarm.

Note: In AlphaPro 10.28 the 627 and 628 codes are autoloaded with wrong feature number and will not work as supposed.

Automatic Delete sees all call requests from a station as one thus if one is deleted all are deleted, 
if this functionality is not wanted use standard call request.

Currently the "Automatic Delete" only works within a node.
If AlphaNet is used add @FF $CANM L%1.dir LV to event handler "call requester mode" OFF. This will broadcast CANCEL MAIL on AlphaNet and remove all "Automatic Delete" mails generated from this station.

AlphaPro Configuration

• Station menu:
  • "Automatic Search" type Forward Call Request (After 20 sec, programmable)

• • Configure the search strings with directory number to be dialed when call request times out

• System timer menu
  • Forward Call Request Timeout (default 20 sec)

(Available from AlphaPro 10.28)

Back to Feature description