Actions

Difference between revisions of "Call Setup Priority"

From Zenitel Wiki

(New page: Call setup priority is a number between 1 and 4, used for controlling setup of conversations. * 1 : Low priority: Call is always in private ringing mode, regardless settings of B station ...)
 
 
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Call setup priority is a number between 1 and 4, used for controlling setup of conversations.  
+
{{AI}}
* 1 : Low priority: Call is always in private ringing mode, regardless settings of B station
+
'''Call setup priority''' is used for controlling the setup of outgoing point to point calls. The priority is applicable to station to station calls only, not when calling features (e.g. like group call).
* 2 : Normal priority
 
* 3 : High priority: Ignore private and Absence settings of B-station. Connect if B station is not busy
 
* 4 : Alarm priority: Also do [[Busy override]] of B. If B station is busy with lower priority calls/features, disconnect B and connect through. Also, if shortage of audio resources prevents call completion, disconnect lower priority call to allow this alarm call to be completed.
 
  
The same scale is used for other features, like groupcall. But these features the only significant value is 4=Alarm. The other values 1-3 are handled the same way.
+
The priority level is set per station from AlphaPro, in the [[Users_%26_Stations_(AlphaPro)#General|Users & Stations]] window:
 +
 
 +
* '''Low:''' Calls will always be in ''private ringing mode'', regardless of the private/open settings of the called station
 +
* '''Normal''' (default): Calls will connect in private or open mode depending on the private/open settings of the called station
 +
* '''High:''' Calls will always be in ''open mode'', regardless of the private/open settings of the called station. Will also override any [[Absence Messages|absence settings]] on the station.
 +
* '''Alarm:''' Calls will always connect in open mode, also if the called station is busy in another conversation or if there are no more speech channels available.
 +
 
 +
[[File:CallSetupPri.PNG|left|thumb|500px|Call Setup Priority]]
 +
 
 +
[[Category: ICX-AlphaCom features]]
 +
[[Category: AlphaCom features]]

Latest revision as of 15:37, 20 May 2022

AI.png

Call setup priority is used for controlling the setup of outgoing point to point calls. The priority is applicable to station to station calls only, not when calling features (e.g. like group call).

The priority level is set per station from AlphaPro, in the Users & Stations window:

  • Low: Calls will always be in private ringing mode, regardless of the private/open settings of the called station
  • Normal (default): Calls will connect in private or open mode depending on the private/open settings of the called station
  • High: Calls will always be in open mode, regardless of the private/open settings of the called station. Will also override any absence settings on the station.
  • Alarm: Calls will always connect in open mode, also if the called station is busy in another conversation or if there are no more speech channels available.
Call Setup Priority