Difference between revisions of "Call restriction from guard station to cell station (Event Handler)"
From Zenitel Wiki
| Line 6: | Line 6: | ||
* The text of the 'dummy' subscriber could be ‘Rejected’. | * The text of the 'dummy' subscriber could be ‘Rejected’. | ||
* Number of rings on call forwarding should be set to 0. Go to [[Exchange_%26_System_%28AlphaPro%29#Calls_and_Options|Exchange & System -> System -> Calls and Options and set Call Forwarding – Ringing Count to 0. | * Number of rings on call forwarding should be set to 0. Go to [[Exchange_%26_System_%28AlphaPro%29#Calls_and_Options|Exchange & System -> System -> Calls and Options and set Call Forwarding – Ringing Count to 0. | ||
| − | * [[Feature Reminder]] (blink’n bleep) should be disabled for the cells. Go to [[Users_%26_Stations_%28AlphaPro%29#User_Preferences|Users & Stations -> User Prefernces and tick off [[Feature Reminder]]. | + | * [[Feature reminder|Feature Reminder]] (blink’n bleep) should be disabled for the cells. Go to [[Users_%26_Stations_%28AlphaPro%29#User_Preferences|Users & Stations -> User Prefernces and tick off [[Feature reminder|Feature Reminder]]. |
In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events: | In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events: | ||
Revision as of 15:39, 18 November 2008
Situation
Calls from the guard station to the cell stations should be rejected unless the cell has made a Call Request to the guard.
Solution
Use the event type “Call Requester Mode” on the cell stations to set/reset call forwarding to a 'dummy' (non-existing) subscriber.
- The text of the 'dummy' subscriber could be ‘Rejected’.
- Number of rings on call forwarding should be set to 0. Go to [[Exchange_&_System_(AlphaPro)#Calls_and_Options|Exchange & System -> System -> Calls and Options and set Call Forwarding – Ringing Count to 0.
- Feature Reminder (blink’n bleep) should be disabled for the cells. Go to [[Users_&_Stations_(AlphaPro)#User_Preferences|Users & Stations -> User Prefernces and tick off Feature Reminder.
In AlphaPro, go to Exchange and System -> Events, press Insert and create the following events:
Event 1 - Set transfer to 'dummy' number 345 when not in Call Requester Mode.
| Event Owner: | Stations w/UDP, Id: 2 (All cell stations) |
| Event type: | 11 – Call Requester Mode |
| When change to: | OFF |
| When related to: | All |
| Action: | $TRF L%1.dir “I345” |
Event 2 - Reset transfer when in Call Requester Mode.
| Event Owner: | Stations w/UDP, Id: 2 (All cell stations) |
| Event type: | 11 – Call Requester Mode |
| When change to: | ON |
| When related to: | All |
| Action: | $TRF L%1.dir “” |