Difference between revisions of "Conversation Outgoing (Event Type)"
From Zenitel Wiki
Line 9: | Line 9: | ||
|'''Subevent''': || N/A | |'''Subevent''': || N/A | ||
|- | |- | ||
− | |'''When change to ON''': || | + | |'''When change to ON''': || Conversation start |
|- | |- | ||
− | |'''When change to OFF''': || | + | |'''When change to OFF''': || Conversation end |
|- | |- | ||
|'''When related to''': || The called station | |'''When related to''': || The called station |
Revision as of 03:09, 4 November 2007
Event description
Event Owner: | A station or an UDP group |
Event type: | 08 - Conversation Outgoing |
Subevent: | N/A |
When change to ON: | Conversation start |
When change to OFF: | Conversation end |
When related to: | The called station |
Application
- CRM IV LED control
- Call logging
- CCTV interfacing
- PA zone control
Additional information
- - This event is always paired with "07 Conv. incoming"
- - The event stays ON also during "Door opening" action.
- - The event is also trigered by local and global group calls, and when prssing M-key in a simplex conference
- - To filter away group calls and conferences: Set "Related to" = UDP 8