Difference between revisions of "EBMDR-8"
From Zenitel Wiki
Line 1: | Line 1: | ||
− | [[File:1023201008.png|thumb|250px]] | + | [[File:1023201008.png|thumb|250px|The EBMDR-8 Expansion Module]] |
The EBMDR-8 Expansion Module is a slave unit to the ECPIR-3P. The EBMDR-8 hence receives power from and communicates through its master, the [[ECPIR-3P]]. | The EBMDR-8 Expansion Module is a slave unit to the ECPIR-3P. The EBMDR-8 hence receives power from and communicates through its master, the [[ECPIR-3P]]. | ||
===<u>Highlights</u>=== | ===<u>Highlights</u>=== |
Revision as of 14:08, 3 January 2017
The EBMDR-8 Expansion Module is a slave unit to the ECPIR-3P. The EBMDR-8 hence receives power from and communicates through its master, the ECPIR-3P.
Contents
Highlights
- Button expansion module for Exigo console mounted access panels
- Powered from master access panel
- Eight programmable buttons with individual labels and status indicators
- Optional button protection covers
- Four units can be connected to one access panel
Exigo Button Expansion Module EBMDR-8
The EBMDR-8 button module features eight fully programmable buttons.
Up to four EBMDR-8 modules may be daisy-chained to one ECPIR giving maximum 35 programmable buttons.
- Power off the ECPIR station by disconnecting the ethernet cable or the external power supply.
- Using the small connection cable supplied, connect the EBMDR-8 expansion module to the ECPIR or preceding module as shown in the figure.
- Connect the white connector on the cable to the corresponding white connector on the ECPIR or preceding EBMDR-8.
- Connect the black connector on the cable to the corresponding black connector on the EBMDR-8.