Event Trigger with parameter (Event Type)

The event type 25 is triggered by a so-called "two-step" event trigger. There are two different types, one which waits for a complete directory number to be dialled, and the other type which triggers on every digit dialled:

• Dialling feature 95 (9535 + dir no), or
• Dialling feature 105 (9545 + digit)

Event description - Event Trigger directory number (95)

Event Owner:	The calling station
Event type:	15 - Event trigger feature
Subevent:	See below
When change to ON:	When dialing Event Trigger + succeeding dir no
When change to OFF:	N/A
When related to:	The succeeding dir no

Additional information

The parameter-attribute of the Event Trigger directory number (95/n) must match the sub-event Example: Feature 95/2 will trigger event type 25, sub-event 2 The user can dial more than one directory number, an Event Report type 25 is generated for each directory number dialed %1 is the station were the function is dialed, %2 is the dialed directory number If the station has mail in its queue, the %2 directory number will default to the sender of the current mail. The user can press M-key to accept the default, or dial another number. This is useful for queue handling. 20 second timeout on inactivity $DISCON_ST can be used for termination with desired tone

Application

Build special functions such as “dynamic grouping”

Example

• Door Opening using Dummy Number (Event Handler)