Difference between revisions of "FCDC-3 - Backwards compatibility"
From Zenitel Wiki
| Line 5: | Line 5: | ||
If you mix software version 4.1.2.12 (or older) and version 4.1.2.13 (or newer) on the same Flowire network, there will be limited compatibility. You can do software upgrade, but regular operations will not work. | If you mix software version 4.1.2.12 (or older) and version 4.1.2.13 (or newer) on the same Flowire network, there will be limited compatibility. You can do software upgrade, but regular operations will not work. | ||
| − | + | {{Note|Update of EX-stations must be done using a FCDC1/2}} | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | {{Note|Update of EX-stations must be done using a FCDC1/2 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 14:44, 31 January 2020
The FCDC-3 is fully compatible with FCDC-1, FCDC-2 (including TFIX stations and Exigo Ex Access Panels) after these devices have been upgraded to software version 4.1.3.13 or newer.
- There is no compatibility if these devices are running version 4.1.3.12 or older.
If you mix software version 4.1.2.12 (or older) and version 4.1.2.13 (or newer) on the same Flowire network, there will be limited compatibility. You can do software upgrade, but regular operations will not work.
|
Update of EX-stations must be done using a FCDC1/2 |