Difference between revisions of "Faulty Station Line (Event Type)"

Revision as of 01:52, 4 November 2007

Event description

Event Owner:	A station or an UDP group
Event type:	13 - Faulty station line
Subevent:	N/A
When change to ON:	When this station's line monitoring has found a problem or if the whole ASLT board becomes faulty
When change to OFF:	When this station's line monitoring has found the station OK
When related to:	N/A

Additional information

There is also a default "Faulty Line" event, which becomes active if one more stations are faulty. This event is used for general line error reporting. See

Application:

- Switch over a PA-system to a standby cir circuit

@@ Line 20: / Line 20: @@
 == Additional information ==
-==Event description==
-{| border="1" cellpadding="4"
+There is also a default "Faulty Line" event, which becomes active if one more stations are faulty. This event is used for general line error reporting. See
-! align="left"|[[Event Owner]]:
-| The faulty station
-|-
-! align="left"|[[Event Handler#Events Types - Grouped by Function|Event type]]:
-| 13 - Faulty station line
-|-
-! align="left"|[[Sub-Event (Event Handler)|Sub-Event]]:
-| N/A
-|-
-! align="left"|[[When Change to (Event Handler)|When Change to ON]]:
-| When this station's line monitoring has found a problem of if the whole ASLT board becomes faulty
-|-
-! align="left"|[[When Change to (Event Handler)|When Change to OFF]]:
-| When this station's line monitoring has found the station OK
-|-
-! align="left"|[[When Related to (Event Handler)|When Related to]]:
-|N/A
-|-
-|}
-* Additional information:
-:- There is also a "Faulty Line" indication on the exchange level, which becomes active if one more stations are faulty. Use that one for general line error reporting
 * Application:

Difference between revisions of "Faulty Station Line (Event Type)"

From Zenitel Wiki

Revision as of 01:52, 4 November 2007

Event description

Additional information